Installing the coin cell battery
1. Replace the coin cell battery in its slot on the computer.
2. Connect the coin cell battery cable to the comupter.
NOTE:
Ensure that the coin cell battery cable does not protrude outside its compartment.
3. Install the:
a)
base cover
b)
battery
c)
battery cover
4. Follow the procedure in
Power connector port
Removing the power connector port
1. Follow the procedure in
2. Remove the:
a)
battery cover
b)
battery
c)
base cover
3. To remove power connector port:
a) Disconnect the power connector cable from the computer [1].
b) Remove the M2.5x5.0 screw to remove the bracket from the computer [2].
c) Remove the bracket from the computer [3].
d) Lift the power connector port from the computer [4].
24
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.