Bissell POWERGLIDE PET 2215 Series User Manual page 6

PowerBrush Switch
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all fi lters, both pre and post-fi lters are in place. DO NOT operate your vacuum without
these fi lters.
1
Power
On/O
Switch
Turn vacuum on by pressing power
switch on (I - ON and O - OFF).
NOTE: The brush roll will automatically shut o when vacuum is locked in upright
position, recline to reactivate.
NOTE: Turn the brush roll OFF when vacuuming hard or delicate surfaces that may
be caught by the rotating brush. This could include hard wood, tiled fl oors, small
area rugs or frieze carpets that have long delicate fi bers or threads.
Adjusting the Variable Suction
1
Locate the variable suction control valve
on the hose wand base.
NOTE: The vacuum will come with the variable suction valve closed for full
suction power.
6 www.BISSELL.ca
2
Brush Roll
On/O
Press the brush roll switch to run the
powerbrush for carpet cleaning (brush roll
is on when light on switch is illuminated).
2
suction control
Twist Valve - Marker
FULL moves to indicate
Decrease the amount
suction level
of suction for cleaning
delicate carpets,
curtains, rugs, or
if difficult to push/
pull by twisting the
variable suction valve
counterclockwise.
Switch
Full
Suction
REDUCED
Reduced
Suction