Mercury 40 SeaPro Operation, Maintenance & Installation Manual page 42

Tilting Outboard To Full Up Position
1. Stop the engine. Move the tilt lock lever to the tilt position. Take hold of
the top cowl grip and raise outboard to full tilt up position. Lock the
outboard in place by moving the tilt lock lever to the lock/run position.
2. Push in the tilt support pin.
3. Lower outboard to rest on the tilt support pin.
Lowering Outboard to run position
1. Raise the outboard off the support pin to disengage tilt support. Pull out
the support pin and lower the outboard.
2. Move tilt lock lever to lock/run position.
a
FEATURES AND CONTROLS
a - Tilt support pin
27386
27385
32
eng