Installing an SFP+ Optical Transceiver
Statement 3
© Copyright Lenovo 2017
Approved 10 GbE SFP+ optical transceivers are supported in some breakout
adapters that can be installed in QSFP+ port slots. The SFP+ optical transceiver
provides two fiber‐optic cable connectors for connecting to external ports.
CAUTION:
When laser products (such as CD‐ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
Do not remove the covers. Removing the covers of the laser product could result
in exposure to hazardous laser radiation. There are no serviceable parts inside
the device.
Use of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser diode.
Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil À Laser de Classe 1
To install an SFP+ optical transceiver in an SFP+ port slot on an installed QSFP+
breakout adapter, complete the following steps.
Note: To avoid damage to the cable or the SFP+ transceiver, do not connect the
cable before you install the transceiver.
Chapter 3: Installing G8332 Hardware and Options
55