Miele G 6892 Operating Instructions Manual page 86

Problem solving guide
Problem
White residue is visible
on cutlery and crockery,
clouding occurs on
glassware; film can be
wiped off.
There are rust stains on
cutlery.
86
Possible cause and remedy
Not enough rinse aid was used.
 Increase the dosage (see "Settings menu - Rinse
aid").
There is no salt in the salt reservoir.
 Fill the salt reservoir (see "Before using for the first
time - Dishwasher salt").
An unsuitable combination detergent has been used.
 Change your detergent. Use a standard liquid,
tablet or powder detergent, and fill the salt and
rinse aid reservoirs in the dishwasher.
The water softener is programmed to too low a water
hardness level.
 Programme the water softener to a higher water
hardness level (see "Settings menu - Water
hardness").
The affected items are not corrosion resistant.
 There is no remedy.
Purchase cutlery which is dishwasher-proof.
A programme was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.
 Always run the QuickPowerWash programme with
the Short programme option selected and without
any crockery in the dishwasher after adding
dishwasher salt.