Miele G 6892 Operating Instructions Manual page 63

EcoStart
The EcoStart function allows you to take
advantage of time variable economy
rates of electricity. Before you can use
this option, you must set up to three
electricity tariff time zones (see
"Settings menu - EcoStart").
You then set the latest time at which the
programme selected should end.
The dishwasher will start automatically
in the cheapest tariff zone within the
time set.
 Use the  arrow buttons to set the
hour and confirm with OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the  arrow buttons to set the
minutes and confirm with OK.
The estimated start time for the
programme selected will appear in the
display.
The  indicator light will come on.
 Close the door.
The selected programme will start
automatically during the most cost
effective time zone. It will finish at the
latest by the set finish time.
Programme options
SmartStart
(only functional in selected countries)
The function is used for
SmartStart
starting your dishwasher automatically
at a time when your energy costs are
most economical.
If the SmartStart option has been
activated in the Settings 
SmartStart will appear in the
"FlexiTimer"  menu instead of
EcoStart (see "Settings, Miele@home,
SmartStart").
If your energy provider offers this
service, they will send a signal to your
dishwasher when energy costs are at
their most economical.
This signal will start the dishwasher.
You can set a time, by which the
programme has to have finished by. The
dishwasher will then calculate the latest
possible start time for the programme
selected and will wait until this start
time for the signal from the energy
provider.
menu,
63