Problem Solving Guide; Technical Problems - Miele G 6892 Operating Instructions Manual

Problem solving guide

With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting Miele. This will save time and money.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.

Unauthorised or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances must only be carried out by a suitably
qualified and competent person in strict accordance with current local and
national safety regulations. The manufacturer cannot be held liable for
unauthorised work.

Technical problems

Problem
The dishwasher does
not start.
The dishwasher stops
during a programme.
After the programme
has started, the In-
operation indicator light
is not visible.
76
Possible cause and remedy
The door is not properly closed.
 Raise the door upwards until the catch engages.
The appliance is not plugged in.
 Insert the plug and switch on at the socket.
The mains fuse has tripped.
 Reset or replace the fuse (see data plate for
minimum fuse rating).
The appliance is not switched on.
 Switch the dishwasher on with the  sensor.
The mains fuse has tripped.
 Reset or replace the fuse (see data plate for
minimum fuse rating).
 If the mains fuse trips again, call Miele.
The reflector panel was not correctly fitted.
 Refit the reflector panel correctly (see Installation
diagram).