Inch Drive - HP ProDesk 480 G4 MT Maintenance And Service Manual

2.5-inch drive

Follow these steps to remove a 2.5-inch drive:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Remove the drive cage (see
4. Remove the 3.5-inch drive (see
5. Remove the three Torx-15 M3.4×7.3 screws (1) that secure the 2.5-inch drive to the drive cage.
6. Remove the 2.5-inch drive (2) from the drive cage.
Reverse this procedure to install a 2.5-inch drive.
32 Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Access panel on page 22).
Drive cage on page 29).
3.5-inch drive on page 31).
21).