Drive Cage - HP ProDesk 480 G4 MT Maintenance And Service Manual

Drive cage

1. Prepare the computer for disassembly (see
2. Remove the access panel (see
NOTE:
3. Disconnect the device power cable (1) from the 3.5-inch drive.
4. Disconnect the device SATA cable (2) from the 3.5-inch drive.
NOTE:
5. Disconnect the device power cable (1) from the 2.5-inch drive.
Access panel on page
3.5-inch drives can be installed in either of the drive cage bays.
A 2.5-inch drive can be installed in the drive cage 2.5-inch drive.
Preparation for disassembly on page
22).
21).
Drive cage 29