Front Bezel - HP ProDesk 480 G4 MT Maintenance And Service Manual

Front bezel

1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Position the computer in the horizontal mode with the front facing toward you.
4. Release the three tabs (1) on the top of the front bezel from the computer chassis.
5. Swing the top edge of the front bezel (2) away from the computer chassis.
6. Remove the front bezel.
Reverse this procedure to install the front bezel.
Preparation for disassembly on page
Access panel on page 22).
21).
Front bezel 23