Auto-Cutter Settings - Citizen CL-S521 User Manual

Cl-s52 series; cl-s53 series; cl-s62 series; cl-s63 series

Hide thumbs Also See for CL-S521:

Table of Contents

Auto-cutter settings

"Cut On" menu will be selected automatically when the auto-cutter is

installed; thus, the printer can be used without adjustment. However, some

printers may not have the "AutoConfigure" function. In this case, select the

"After Print" menu of the menu setup mode, and the "Cut On" menu on the

"Function Select" menu. If the printer has the "AutoConfigure" function, the

"AutoConfigure" menu will be printed out in front of "Function Select" menu

when you print the "Current Setup".

See the printer's User's Manual (CD-ROM) for details on "Print Menu Settings".

Note

Loading Media (For CL-S52X/53X/62X/63X/CL-E720/E730/E720DT)

(1)

Press the printhead lever, and then open the head unit and sensor arm.

(2)

With scissors, cut the end of the media loaded in the media holder.

(3)

Feed the end of the media through the cutter assembly until the end

extends 10 mm past the cutter cover.

(4)

Close the head unit and sensor arm.

(5)

The cutter will operate one time when the FEED key is pressed.

Approx. 10 mm

-8-

Printhead lever

Table of Contents

Cl-s400dt Cl-e720 Cl-e730 Cl-e720dt