9.
Troubleshooting
If an error is detected, an alarm will sound and an LED on the control panel will
display the nature of the error.
List of error displays (For CL-S52X/53X/62X/63X)
Media Out
(media location cannot be
detected)
Auto Cutter Abnormality
(such as blade jamming)
Abnormal auto-cutter
temperature
List of error displays (For CL-S400DT/E720/E730/E720DT)
Paper jam
Auto-Cutter Abnormality
Cutter motor temperature
abnormality
Contact your supplier or service representative, if the following conditions
are observed.
The cutter does not cut the media well.
z
The blade of the cutter may be worn out or covered by a label glue.
Above error condition is occurred.
z
Error
Error
-15-
Print
Condition
LED
LED
ON
OFF
OFF
OFF
ON
OFF
OFF
LCD Display
Error
Paper Jam
Error
Cutter Fail
Alarm
Cutter Hot
CAUTION
Error
LED
ON
OFF
OFF
ON
ON
OFF
PowerLED
Flashing (red)
Flashing (red)
Flashing (red)