Cut Settings - Citizen CL-S521 User Manual

6.

Cut settings

The auto-cutter-related commands are described below. See the Command
Reference manual for more details.
The following commands set the cut position and number of operations.
Cut-position setup command
This command specifies the distance between the sensor and the media cut
position.
Media-cut command
This command executes one media-cut operation.
Software-switch setup command
This command temporarily selects the on/off state of the auto cutter or
z
the peeler, which are normally set in memory.
Examples:
n = 1: The auto cutter is set in the on state
n = 0: The auto cutter is set in the off state
See the Command Reference manual for a detailed description of the
Note
parameter n of the command.
Sheet-cutting interval command
This command instructs the printer to cut the media after a specified number
of sheets have been printed.
Example: To set the sheet-cutting interval to 10 sheets
Two-digit data method
STX L
c10
(Other label format commands)
E
STX fnnn
STX o
STX Vn
cnn (two-digit entry method)
:nnnn (four-digit entry method)
Four-digit data method
STX L
： 0010
(Other label format commands)
E
-11-