Panasonic HomeHawk KX-HN1003 Installation Manual page 20

Setup
Initial setup (for Android device
users)
1
Plug in the camera and wait
about 1 minute for the
camera's LED to light in green.
R If the LED does not light in
2
Start the [HomeHawk] app.
R The end-user license
3
Follow the on-screen
instructions.
4
Tap [Indoor HD Camera].
5
Tap [Set up the HD Camera].
6
When prompted, press the
MSETUPN button on the back
of the camera.
R The LED indicator blinks in
R The app temporarily
7
If necessary, enter the
password required to connect
20
HN1003W_(en_en)_0302_ver001.pdf
green, or if you experience
trouble during this
procedure, reset the
camera (page 22) and
then repeat this procedure.
agreement is displayed the
first time you start the app.
green.
changes your mobile
device's wireless LAN
setting so that it connects to
the camera directly.
For assistance, please visit http://shop.panasonic.com/support
20
to your wireless router and
then tap [Next].
R The camera and your
mobile device connect to
your wireless router.
R If you enter the wrong
password, an error is
displayed. Repeat the initial
setup procedure from the
beginning.
8
When prompted, press the
MSETUPN button on the back
of the camera.
R The camera registers your
mobile device.
9
When prompted, set the
password that will be used to
access the camera.
10
When prompted, enter a
name for your mobile device
and then tap [OK].
R This setting allows you to
change the name assigned
to your device. It can help
you identify your mobile
device when performing
certain operations, such as
deregistering a mobile
device.
R A list of all cameras
registered to the app is
displayed when initial setup
is complete.
2018/03/02 14:18:12