Cleaning The Spark Arrester - Yamaha TT-R50E Owner's Manual

1. Air filter check hose
2. If dirt or water is visible, remove
the hose, clean it, and then install
it.
PERIODIC MAINTENANCE AND ADJUSTMENT

Cleaning the spark arrester

The spark arrester should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
WARNING
 Always let the exhaust system
cool prior to touching exhaust
components.
 Do not start the engine when
cleaning the exhaust system.
TIP
Make sure to select a well-ventilated
area free of combustible materials to
clean the spark arrester.
1. Remove the tailpipe by removing
the bolts, and then pulling it out of
the muffler.
7-10
EAU40422
EWA10981
1. Tailpipe bolt
2. Tailpipe
2. Tap the tailpipe lightly, and then
use a wire brush to remove any
carbon deposits from the spark
arrester portion of the tailpipe and
inside of the tailpipe housing.
1
1. Spark arrester
7