Bottom Cover - HP 15-ay000 Maintenance And Service Manual

Bottom cover

Description
Bottom cover for use on HP Notebook models with an optical drive
Bottom cover for use on HP Notebook models without an optical drive
Bottom cover for use on HP 250/256 G5 Notebook PC models with an optical drive (gray)
Bottom cover for use on HP 250/256 G5 Notebook PC models without an optical drive (gray)
Bottom cover for use on HP 250/256 G5 Notebook PC models with an optical drive (black)
Bottom cover for use on HP 250/256 G5 Notebook PC models without an optical drive (black)
Before removing the bottom cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
To remove the bottom cover:
1. Position the computer upside down with the front toward you.
2. Remove the two rubber bumpers from rear of the bottom of the computer (1)
3. Remove the 11 Phillips PM2.5×8.0 screws (2) that secure the bottom cover to the computer.
52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 48).
Optical drive on page 49), if installed.
Spare part number
854999-001
857281-001
859513-001
859514-001
906832-001
906833-001