Fisher & Paykel DD36SDFTX1 User Manual page 31

Fault codes
F1
F2
F3
F4
F5
F6
F7
F9
Possible causes
Flood switch has been
activated.
Motor problem.
Temperature sensor
failed.
Faulty temperature
sensor or element.
Lid fault.
Lid fault.
Lid fault.
Electronics
malfunction.
Fault codes
What to do
Turn off the water supply to the
DishDrawer® and call your Authorised
Service Centre or Customer Care.
Call your Authorised Service Centre or
Customer Care.
Ensure water coming in through the inlet
hose is less than 65 o
install a tempering valve on your water
supply.
Call your Authorised Service Centre or
Customer Care.
Plug the DishDrawer back in or turn it on
at the power supply. Fault may reset.
Plug the DishDrawer back in or turn it on
at the power supply. Fault may reset.
Plug the DishDrawer back in or turn it on
at the power supply. Fault may reset.
Call your Authorised Service Centre or
Customer Care.
29
C. You may need to