Fisher & Paykel DD24DCB7 User Manual page 28

User maintenance instructions -
24
Cleaning the spray arm and filter plate
To remove and clean the spray arm and filter plate
Unplug the dishwasher or turn it off at the power
1
supply.
Unclip the glass supports (if fitted) from the rack
2
wires and fold all the adjustable racks away, so
that they are upright and close to the top.
Remove the base rack carefully. Lift from the back
3
end first to prevent knocking the detergent and
rinse aid dispenser.
Lift the spray arm and shake any foreign material out.
4
Rinse it clean under running water and wipe with a damp cloth.
Lift and remove the drain filter.
5
In the centre of the filter plate there are two rings. Turn the outer ring anticlockwise, about a 1/8
6
turn. This will release the filter plate.
Lift the filter plate out. Remove any foreign material, wash in hot soapy water and rinse
7
thoroughly in clean water, then wipe with a damp cloth. Take care handling the sharp outer edge
of the filter plate.
4
6
Turn outer
ring 1/8 turn
DD24/DD60 models
2
5
1
3
7