Honeywell LYNX Touch L5200 Series User Manual page 45

Ready To Arm
Name Frequency
None
Type
None
Location
Ready To Arm
City Country
State Zip Code
0
Ready To Arm
Name Frequency
Lights Daily
Type Scenes
Scene
Start Time Time Randomization
12:00 AM No
4. Select "Name". The system displays a keypad.
5. Enter a name (up to 13 digits long) for the scheduled function
on the displayed keypad then select "Done".
6. Select "Type" then scroll through and select one of the
following options:
None
Auto Night Stay (displayed if Arm Night zone is enabled)
Auto Stay
Rules
Save
Disarm Notification
Scene
5200-100-057-V0
7. Select "Frequency" then select one of the following displayed
options:
None
Daily
Weekly
Sunrise
If Sunrise or Sunset is selected, the Type option defaults to
"Scene". Select "Location" and proceed to step 8, otherwise
proceed to step 9. If Total Connect Services are enabled and
Sunrise or Sunset is selected, the Type option defaults to
"Scene". Proceed to step 13.
8. Select "City", "Country", "State" and "Zip Code" and enter the
required information on the displayed keypad then select
"Done". Select "Save" when all fields are complete. (Refer to
the Enable Single Day Weather Reporting section for
additional information regarding programming these fields.)
Proceed to step 13.
9. Program the options below, based upon the Type selected in
Step 6 and the Frequency selected in step 7 or if "Scene" is
selected proceed to Step 13.
Save
Once
Daily
5200-100-061-V0
Weekday
Weekly
Monthly
10. Select "Rules" then select a Rule from the displayed list
(Rules 1 through Rules 20).
11. Enter a Start Time and End Time on the displayed keypad
then select "Save".
12. Select the "2" button to return to the Automation
programming screen or the Home key to return to the Home
Screen.
13. Select "Scenes". Select the desired scene from the displayed
list.
14. Enter a Start Time and End Time on the displayed keypad
then select "Done".
15. If "Daily", "Weekday", "Weekly" or "Monthly" was selected for
"Frequency", the Randomization field is displayed. Select
"Randomization", the system toggles between "No" and Yes".
Note: If using the Randomization feature scheduled events
should not be programmed within one hour of each other.
Save
16. Select "Save". The system displays to the list of programmed
Schedules.
5200-100-114-V0
17. Select the "2" button to return to the Automation
programming screen or the Home key to return to the Home
Screen.
² ²
86(5 )81&7,216 86(5 )81&7,216
86(5 )81&7,216 86(5 )81&7,216
Once
Weekday
Monthly
Sunset
Start Time/End Time/ Date
Start Time/End Time
Start Time/End Time
Start Time/End Time/Day of the Week
Start Time/End Time/Day of the Month
$XWRPDWLRQ