Transporting The Unit - Stihl FS 90 Instruction Manual

Switching off the engine
Push the slide control in the
N
direction of the arrow at the stop
sign h to STOP-0
At very low temperatures
As soon as engine is running:
Blip the throttle trigger = disengage
N
starting throttle position – the slide
control jumps to run F – engine
begins to idle
Press the throttle trigger slightly
N
Let the engine warm up briefly
N
If the engine does not start
Choke knob
If the choke knob was not returned to e
in time after the engine turned over for
the first time, then the engine has
flooded.
Turn the choke knob to e.
N
Move the slide control, throttle
N
trigger interlock and throttle trigger
to the starting throttle position
Start the engine – to do this, pull the
N
starter rope briskly – 10 or 20 pulls
may be needed
If the engine still does not start
Set slide control to STOP-0
N
Remove the spark plug - see "Spark
N
plug"
Dry the spark plug
N
FS 90, FS 90 R
Crank the engine several times with
N
the starter – to clear the combustion
chamber
Replace the spark plug – see "Spark
N
plug"
Set the slide control to START
N
Turn the choke knob to e – even if
N
the engine is cold!
Restart the engine
N
Adjusting the throttle cable
Check throttle cable adjustment –
N
see "Adjusting the throttle cable"
If the tank has been drained completely
After refueling, press the manual
N
fuel pump bulb at least five times –
even if it is full of fuel.
Set choke lever depending on
N
engine temperature
Restart the engine
N

Transporting the Unit

Using Transport Guard
The type of transport guard depends on
the metal cutting attachment supplied
with the machine. Transport guards are
available as special accessories.
230 mm Grass Cutting Blades
English
33