Getting Started; Setting Up - Panasonic KX-TGF380 Operating Instructions Manual

Setting up

Connections
R If you do not connect the telephone line cord
and use only cellular lines, set the cellular line
only mode to use this unit more conveniently
(page 18).
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Connect the telephone line cord to the unit
until you hear a click.
Fasten the AC adaptor cord and the telephone
line cord by hooking it.
Connect the AC adaptor to the power outlet.
Connect the telephone line cord to the
single-line telephone jack (RJ11C) until you
hear a click.
A DSL/ADSL filter (not supplied) is required if
you have a DSL/ADSL service.
Connect the corded handset cord to the
corded handset and the base unit until you
hear a click.
3
1
1
Note:
R Use only the supplied Panasonic AC adaptor
PNLV226.
For assistance, please visit http://shop.panasonic.com/support
TGF380_TG590SK(en-en)_0907_ver201.pdf 9
n Charger
Handset battery installation
R USE ONLY rechargeable Ni-MH batteries AAA
R Do NOT use alkaline/manganese/Ni-Cd
R Confirm correct polarities (
7
7
5
4 6
Handset battery charging
Charge for about 7 hours.
R Confirm "Charging" is displayed (
3 3
R When the batteries are fully charged, "Fully
2
R Follow the directions on the display to set up
the unit.
Connect the AC adaptor to the power outlet.
1
(R03) size ( ).
batteries.
1
R Follow the directions on the display to set up
the unit.
charged" is displayed.
1

Getting Started

1
, ).
1
).
9
2016/09/07 12:38:10