Registering A Wireless Speaker - VTech VCS752 User Manual

Sip conference phone with wireless mics

Hide thumbs Also See for VCS752:

Table of Contents

Configuring the Phone

Registering a wireless speaker

For large meeting rooms, you can extend the range of the VCS752 with up to three

VTech VCS850 DECT Expansion Wireless Speakerphones.

Note: If a DECT headset is already registered, you can register up to two VCS850

DECT Expansion Wireless Speakerphones.

To register the Wireless Speakerphone to the VCS752:

1. On the VCS752 SIP Conference Phone, press MENU.

2. On the Main Menu, highlight User settings and then press SELECT.

3. On the User settings menu, highlight Wireless speaker.

4. With Register highlighted, press SELECT.

The screen displays Registering... and then Registration succeeded. The base

plays a confirmation tone. The registered speaker LEDs stop flashing red and

green. The LEDs turn green briefly and then turn off.

5. Repeat steps 1 to 4 for any additional wireless speakers.

•

If a speakerphone fails to register, the base unit will display Registration

failed.

•

To cancel registration, press CANCEL.

For complete operating instructions, see the VCS850 User Guide, available from our

website at businessphones.vtech.com.

Table of Contents