Water Inlet Fault - Miele G 6510 Operating Instructions Manual

Problem solving guide

Water inlet fault

Problem
One of the following
messages appears in
the display:

Open stopcock

Water intake
The following message
appears in the display
during the
SolarSave
gramme:

Intake temp. low
74
Possible cause and remedy
The tap is turned off.
 Turn on the tap fully.
Before rectifying the problem, you must:
 Switch the dishwasher off with the  button.
Water intake is restricted.
 Turn on the tap fully and start the programme
again.
 Clean the water inlet filter (see "Maintenance").
 The water pressure at the intake is lower than 30
kPa (0.3 bar).
Seek professional advice.
The intake water has not reached the required tem‐
perature of 45°C (see "Water connection - Connec‐
pro‐ tion to the water supply").
 Start the programme again.
 If the fault message appears again, select a differ‐
ent programme.