Philips MCM530 Service Manual page 14

DISMANTLING INSTRUCTIONS
Dismantling of the Front Panel assembly
1) The Knob Volume (pos 136) can be remove by pulling it out
in the direction as shown in Figure 7.
2) Loosen 4 screws D (see Figure 8) to remove the Bracket
Top (pos 251) and CDC Key Board (pos 1105B).
3) Loosen 2 screws E (see Figure 8) to remove the Bracket
Combi (pos 252).
4) Loosen 9 screws F (see Figure 8) to remove the Front
Board (pos 1105A).
5) Loosen 3 screws G (see Figure 8) to remove the USB PC
LINK Board (pos 1106).
Figure 8
2-2
Figure 7
Dismantling of the Rear Panel assembly
1) Loosen 3 screws H and 2 catches C3 (see Figure 9)
to remove the Tuner Board assembly.
2) Loosen 1 screw K (see Figure 9) to free the Mains
Socket Board (pos 1102-1002B).
3) Loosen 4 screws J and 2 catches C4 (see Figure 9)
to remove the Cabinet Rear (pos 256) by sliding it
out towards the rear (see Figuer 10).
Note : Tuner Board assembly and Mains Socket
Board can also be remove together with the
Cabinet Rear.
4) Loosen 4 screws L (see Figure 9) to remove the Fan
(pos 1104) from the Cabinet Rear.
Figure 9
2-2
Figure 10