Chapter 21: Remote Access
®
21.2 Windows
– based Network Configuration
In this section you will determine basic information about your network
Make sure that the DVR is properly connected to the router/modem and
®
that you have a computer works with Windows
operating systems
connected to the same router.
Follow these steps to determine the basic information about your network:
1. Press the "Windows" key and the "R" key at the same time on
your computer's keyboard. Type "cmd" and press the Enter key.
2. In the command prompt window, type ipconfig and press Enter.
Find the section called Ethernet adapter Local Area Connect
or
Wireless LAN Adapter Wireless Network Connection
80