Sensor Control - Hamilton Beach 14963 Manual

Sensor Control

This iron is equipped with a position/motion sensor. This means
that if the iron is left motionless it will turn off automatically and
cool to room temperature.
To restart iron, simply move the iron and allow it to reheat on
the heel rest position.
The iron will reheat to the previously selected setting.
POSITION SENSING
The iron will turn off automatically when left in the following
positions. The auto off time varies based on the iron's
position.
IRON POSITION
Resting on soleplate
Resting on either side
Resting on heel
Auto Shutoff Reset Light
After 30 seconds of no movement in the horizontal position,
the iron will automatically shut off and the green light will
blink. Move iron upright to vertical position to turn back on.
840164303 ENv01.indd 5 840164303 ENv01.indd 5
MOTIONLESS TIME
30 seconds
30 seconds or 15 minutes
depending on exact
orientation
15 minutes
5
8/22/14 1:06 PM 8/22/14 1:06 PM