Troubleshooting - Hamilton Beach 14963 Manual

Caring and Cleaning
Self-Clean
To keep the steam vents clear of any buildup, follow these
instructions each time you iron using steam.
1. Set Temperature Control Dial to OFF. Fill iron with water to
1/2 of its maximum capacity.
2. Set Steam ON/OFF Control to O (Dry Iron). Set
Temperature Control Dial to Linen setting and let iron heat
for 2 minutes.
3. Set Temperature Control Dial to OFF. Unplug iron and hold
over a sink with soleplate facing down.
4. Press and hold the Self-Clean Button. Boiling water and
steam will flow out of steam vents. Allow all water to drain
from iron.
5. Gently move iron front to back to allow water to clean
entire soleplate area.
6. If water still remains inside of soleplate, reheat iron as
indicated in Step 2. Boiling water and steam could still
flow out of steam vents.

Troubleshooting

PROBLEM
Iron won't
heat
840164303 ENv01.indd 10 840164303 ENv01.indd 10
(cont.)
PROBABLE CAUSE
• Is the iron plugged in and the outlet working?
Check the outlet by plugging in a lamp.
• Is the Temperature Control Dial turned to a
fabric setting?
• If automatic shutoff model, is the Reset Light
flashing? Move the iron to reset.
10
8/22/14 1:06 PM 8/22/14 1:06 PM