Parts And Features; Sensor Control - Hamilton Beach 14975 Instruction Manual

840153100 Ev01.qxd 5/18/06

Parts and Features

1. Water Fill Cover
2. Steam ON/OFF Control
3. Spray and Blast Buttons
4. Auto Shutoff Reset
Light* (GREEN) and
Power ON Light (RED)
5. Swivel Power Cord
2:36 PM Page 4
6. Heel Rest
7. Temperature Control Dial
8. Soleplate
9. Self Clean
* on select models only
Spray Steam
Steam ON/OFF
Control
4

Sensor Control

This iron is equipped with a position/motion sensor. This means
that if the iron is left motionless it will turn off automatically and
cool to room temperature.
To restart iron, simply move the iron and allow it to reheat on
heel position.
The iron will reheat to the previously selected setting.
Position Sensing
The iron will turn off automatically when left in the following
positions.
The auto off time varies based on the iron's position.
Iron Position
Resting on soleplate
Resting on either side
Resting on heel
Auto Shutoff Reset Light
After 30 seconds of no movement in the horizontal position,
the iron will automatically shut off and the green light will
blink. Move iron upright to vertical position to turn back on..
Motionless Time
30 seconds
30 seconds
15 minutes
5