Manually Selecting The Ratio; Ratios/Zoom) - Sharp MX-2300G Manual

5
To cancel scanning of the original and copying...
Press the [STOP] key (
• To cancel automatic ratio selection...
Touch the [Auto Image] key so that it is no longer highlighted.
• To return the ratio to 100%...
To return the ratio setting to 100%, touch the [Copy Ratio] key to display the ratio menu and then touch the [100%] key.
MANUALLY SELECTING THE RATIO (Preset

ratios/Zoom)

The enlargement and reduction keys can be used to select five preset ratios each (from a maximum of 400% to a
minimum of 25%).
In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
1
When the automatic document feeder is used, the ratio selection range is 25% to 200%.
Ready to scan for copy.
Full Colour
Colour Mode
Job Detail
Settings
2
Auto
Exposure
100%
Copy Ratio
or
).
2-Sided Copy
Original
A4
Output
Plain
A4
Special Modes
A4
1.
File
A4R
2.
B4
3.
A3
Quick File
4.
Press the [COLOUR START] key (
or the [BLACK & WHITE START] key
( ).
Scanning begins.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you placed the original on the document glass, scan each
page one page at a time. If you are using the sort function or
other function that requires all originals to be scanned before
the copies are printed, you must use the same [START] key
that you used to scan the first original to scan each of the
remaining originals.
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Touch the [Copy Ratio] key.
0
27
)