Sharp MX-2300G Manual page 118

Stamp
Date Stamp
Page
Text
Numbering
4
• "Text" cannot be configured in a position that already has "Date" and "Page Numbering" settings.
• If "Text" is configured without selecting a position, the text will be printed in the top left position.
Stamp
Date Stamp
5
Page
Text
Numbering
Text
6
Pre-Set
Recall/Entry Store/Delete
Text
Recall
No.01 AAA AAA
No.02 BBB BBB
7
No.03
Layout Cancel OK
Layout Cancel OK
Cancel OK
First Page
All Pages
Bk(Black)
Print Colour
(2)
Cancel OK
3 6 Direct Entry
No.04
No.05
No.06
(1)
Select the print position.
Select from 6 positions: top left, top centre, top right, bottom
1/2
left, bottom centre, bottom right.
The keys that show the print positions will appear as follows
depending on the state of the settings.
The above key is the top left key. The appearance of the keys
varies by position.
Touch the [Text] key.
1/2
Touch the [Recall/Entry] key.
To store or delete a text string, touch the [Store/Delete] key.
☞
Storing, editing, and deleting text strings
Specify the text to be printed.
The [Direct Entry] key can be touched to display the text entry
screen. To enter text, see "6. ENTERING TEXT" in the User's
Guide. When all characters have been entered, touch the [OK]
1/5
key.
(1) Touch the text string that you wish to
select.
The [3
3-item display and 6-item display. When 3-item display is
selected, the entire text string appears in each key.
(2) Touch the [OK] key.
117
Not selected, stamp setting has not
been selected.
Selected during selection of the stamp
setting.
Not available, stamp setting has already
been allocated.
6] key can be touched to switch between
(page 120)