Sharp MX-2300G Manual page 112

Ready to scan for copy.
Full Colour
Colour Mode
Job Detail
2
Settings
Auto
Exposure
100%
Copy Ratio
Special Modes
Stamp
3
Quick File
(2)
Stamp
Date Stamp
Page
Text
Numbering
4
• "Page Numbering" cannot be configured in a position that already has "Date" and "Text" settings.
• "Page Numbering" cannot be selected in multiple positions. If the [Page Numbering] key is touched when Page
Numbering has already been set, a message will appear asking you if you wish to move the page numbers to the
selected position. If you wish to move the page numbers, touch the [Yes] key. If not, press the [No] key.
• If "Page Numbering" is set without selecting a position, the page numbers will be printed in the bottom centre
position.
Stamp
Date Stamp
5
Page
Text
Numbering
2-Sided Copy
Original A4
Output
Plain
A4
Special Modes
A4
1.
A4R
File
2.
B4
3.
A3
4. Quick File
Colour
Image Edit
Adjustments
File Proof Copy
Layout Cancel
Layout Cancel
Touch the [Special Modes] key.
0
Select Stamp.
OK
3/4
(1) Touch the
the screens.
(2) Touch the [Stamp] key.
(1)
Select the print position.
OK
Select from six positions: top left, top centre, top right, bottom
1/2
left, bottom centre, bottom right.
The keys that show the print positions will appear as follows
depending on the state of the settings.
The above key is the top left key. The appearance of the keys
varies by position.
Touch the [Page Numbering] key.
OK
1/2
111
keys to switch through
Not selected, stamp setting has not
been selected.
Selected during selection of the stamp
setting.
Not available, stamp setting has already
been allocated.