Function Keys - Janome Memory Craft 8200QC Instruction Book

Janome 8200 Sewing Machine Instruction Manual
e
q
q LCD screen
The LCD screen shows the following information when the
machine is turned on:
w Stitch pattern
e Mode
r Stitch pattern number
t Recommended type of presser foot
y Stitch width
u Stitch length
i Cursor key (refer to pages 79, 80)
Press " " or " " to move the cursor to check or edit
the pattern combination.
o Stitch width adjusting key (refer to pages 30, 39, 49)
Press this key to alter the stitch width.
!0 Stitch length adjusting key (refer to pages 30, 39, 49)
Press this key to alter the stitch length.
!1 Mode key (refer to page 25)
Press the mode key to select the mode.
When the power is turned on, the direct pattern selection
(mode 1) is set automatically.
!2 Number keys (refer to page 24)
• Direct pattern selection
You can select the stitch patterns from 0 to 9 directly in
mode 1 (direct pattern selection mode).
• Numeric pattern selection
Enter a 2-digit pattern number to select the desired stitch
pattern in modes 2 to 6.
!3 Twin needle key (refer to page 69)
Press this key when sewing with a twin needle.
!4 Mirror image key (refer to pages 73)
Press this key to sew a mirror image of the selected
pattern.
www.janomeflyer.com
r t
w
y
u
!1
!3
!4
!5

Function Keys

!5 Memory key (refer to pages 70)
Press this key to register programmed pattern
combinations.
Stitch patterns in mode 2 to 6 can be
Up to 50 stitch patterns combination can be memorized.
!6 Clear key (refer to pages 26, 80)
Press the clear key to clear the memorized stitch pattern.
Press and hold this key until the buzzer sounds to delete
the whole pattern combination.
!7 Set key (refer to page 25)
Press this key to enter the setting mode for customizing
the machine settings.
!8 Elongation key (refer to page 67)
Press this key to elongate satin stitch patterns.
!9 Startover key (refer to page 74)
Press this key to sew a pattern combination from the
beginning.
@0 Lockout key (refer to page 13)
Press this key to lockout the machine when threading the
machine, replacing the accessories etc.
To reduce the risk of injury, all the buttons and keys are
deactivated.
To unlock the machine, press this key again.
9
o !0
i
!7 !8
!9 @0
MC8200 Owners Manual/ User Guide
!2
!6