LED Light (Torch)
The LED light illuminates darker work areas. When set, pull the secondary
trigger to operate.
When the LED light is on and an image is captured, the LED light
momentarily shines brighter and functions as a visible camera flash.
To set:
1. Push .
2. Push / to highlight Camera.
3. Push or to view the menu.
4. Push / to highlight Laser/Torch.
5. Push or to view the menu.
6. Push / to highlight an option.
7. Push to set the option.
8. Push:
•
to set the change and go back to the live view.
•
or to set the change and go back to the previous menu.
•
to cancel the change and go back to the live view.
Backlight
The backlight level control is set to low, medium, and high. To set the backlight:
1.
Push .
2.
Push / to highlight Camera.
3.
Push or to view the menu.
4.
Push / to highlight Backlight.
5.
Push or to view the menu.
6.
Push / to highlight an option.
7.
Push:
•
to set the change and go back to the live view.
•
or to set the change and go back to the previous menu.
•
to cancel the change and go back to the live view.
Shop for Fluke products online at:
Performance Series Thermal Imagers
Note
MyFlukeStore
www.
1.877.766.5412
.com
Menus
45