Nikon s4300 Reference Manual page 238

I
Step2
Transferring Images to the Computer
2.1
Choose how images will be copied to the computer.
Choose one of the following methods:
• Direct USB connection:
Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the supplied USB
Cable UC-E6. The camera automatically turns on.
To transfer images that are saved in the camera's internal memory, remove the
memory card from the camera before connecting it to the computer.
• SO card slot:
If your computer is equipped with an SO card slot, the card can be
inserted directly in the slot.
• SO card reader:
Connect a card reader (available separately from third-party
suppliers) to the computer and insert the memory card.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
• When using Windows 7
If the dialog shown at right is
displayed, follow the steps below to
select Nikon Transfer 2.
Under Import pictures and
videos, click Change program. A
program selection dialog will be
displayed; select Import File
using Nikon Transfer 2 and click OK.
2 Double-click Import File.
If the memory card contains a large number of images, it may take a while for
Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.
~
Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB
hub .
• Using ViewNX 2