Nikon s4300 Reference Manual page 228

I
Step4
Turn On the Camera
Press the power switch to turn on the camera.
• The power-on lamp (green) will light, and then the
monitor will turn on (the power-on lamp turns off when
the monitor turns on).
n
Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter
standby mode, and the power-on lamp will flash. If no operations are performed for
approximately another three minutes, the camera will turn off automatically. ·
To reactivate the monitor while the power-on lamp is flashing, press any of the following
buttons:
- Power switch, shutter-release button,
10
(shooting mode) button,
[E
(playback) button,
ore
(~If
movie-record) button
First Steps