Document Feedback - Brocade Communications Systems 6505 Hardware Reference Manual

•
•
•
•
•
2. Brocade 6505 serial number
The switch serial number and corresponding bar code are provided on the serial number label,
as illustrated below.:
The serial number label is located on the switch ID pull-out tab located inside the chassis on
the port side on the left
In addition, the chassisShow command displays the Brocade 6505 serial number, as well as
information about the port and application blades, and other field-replaceable units (FRUs).
3. License ID
Use the licenseIdShow command to display the license ID.
4. World Wide Name (WWN)
Use the wwn command to display the switch WWN.
If you cannot use the wwn command because the switch is inoperable, you can get the WWN
from the same place as the serial number.

Document feedback

Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
documentation@brocade.com
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.
Brocade 6505 Hardware Reference Manual
53-1002449-01
DRAFT: BROCADE CONFIDENTIAL
supportSave command output
Detailed description of the problem, including the switch or fabric behavior immediately
following the problem, and specific questions
Description of any troubleshooting steps already performed and the results
Serial console and Telnet session logs
syslog message logs
*FT00X0054E9*
FT00X0054E9
xi