Appendix; Adding And Registering Handsets/Headsets; Register A Handset To Your Telephone Base - AT&T CL82311 Complete User's Manual

Appendix

Adding and registering handsets/headsets

Your telephone can support up to 12 DECT 6.0 cordless handsets (AT&T model
CL80121/CL80131, sold separately) or up to 10 cordless handsets and
2 cordless headsets (sold separately).
headsets
for a list of compatible DECT 6.0 cordless headsets.
handset or headset must be registered to the telephone
must register each handset or headset separately.
To register a cordless headset to this telephone system, please refer to the
user's manual of the cordless headset for more details. To register a cordless
handset, see below.
The handsets provided within your product box are already registered as
HANDSET 1 and so forth. Additional handsets are assigned numbers in the
sequential order they are registered (up to HANDSET 12).

Register a handset to your telephone base

1. Before you begin registration, make sure the handset is
out of the telephone base or charger and shows To register,
see manual.
2. Put the handset you wish to register on the telephone
base cradle.
3. The screen shows Registering... Please wait and the
IN USE light turns on. It takes up to 90 seconds to
complete registration. HANDSET X Registered appears on
the screen, with HANDSET being the handset name and
X being the handset number (1-12). The handset beeps
and the IN USE light turns off. The handset is now
registered with the telephone base.
If registration fails, the system will automatically
try to register again. If this continues after
the third try, Registration failed appears on
the screen for a few seconds, and then you
will see To register, see manual. This may
take up to five minutes to occur. Please start
again from Step 1 above.
www.telephones.att.com/
Visit
For registration, put the handset
on the telephone base, not the
handset charger.
59
Each new
base before use. You
To register,
see manual.
Registering...
Please wait
HANDSET X
Registered