Network Reports menu
This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup Reports or
Network Reports
Menu item
Print Setup Page
Print NetWare Setup Page
Network Card menu
This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x> Std Network Setup or Net <x> Setup Network Card
Menu item
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0-225 seconds
Banner Page
Off
On
TCP/IP menu
Use the following menu items to view or set the TCP/IP information.
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Description
Prints a report containing information about the current network setup
Notes:
•
The Setup Page contains information about the network printer settings, such as
the TCP/IP address.
•
The NetWare Setup Page menu item appears only on models that support NetWare
and shows information about NetWare settings.
Description
Lets you view the connection status of the Network Card
Lets you view the speed of a currently active network card
Lets you view the network addresses
Sets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
•
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
•
If a value of 1–9 is selected, then the setting is saved as 10.
Allows the printer to print a banner page
Note: Off is the factory default setting.
Understanding printer menus
168