Chapter 4. Quick Start - Wasp WCS 3900 Programming Manual

Chapter 4
Quick Start
Your Wasp WCS 3900 / 3905 Scanners are ready for use. The default settings of
the scanners have been pre-programmed for the most common bar code
configurations. Use the "WCS 3900 / 3905 Setup & Configuration" sections only
to customize the scanners settings. Please review the "Enable Bar Code
Symbologies" configuration beginning on page 14 to see the list of bar codes
symbologies which are enabled by default.
Tip:
• Use the pre-printed "Bar Code Test Symbols" in Appendix A on pages
28-30 as a test chart to practice scanning.
USB Connection
WCS 3905
USB Scanner
PS2 Connection
WCS 3900
PS2 Scanner
USB Connector
4
BACK OF PC
KEYBOARD MOUSE
NOT
DO PLUG
IN MOUSE PORT!
KEYBOARD
Y-CABLE
KEYBOARD