Terminator/Code Id - Wasp WCS 3900 Programming Manual

Chapter 5

Terminator/Code ID

Terminator
The 'Terminator' option is used to specify the end-of-text message and is primarily used to
denote the end of the bar code value.
CR *
None
LF
CR + LF
Code ID
The 'Code ID' option sends a specific value when a particular bar code symbology is
scanned. For example, if 'Code ID' is enabled and Code 39 is scanned, an "M" will appear
in the data stream in front of the bar code value.
Code ID On
Code ID Off *
O - MSI/Plessey T - EAN 128
S - EAN 8 K - Code 128
E - UPC E N - Codabar
A - UPC A D - Full ASCII Code 39
F - EAN 13 M - Std. Code 39
L - Code 93 I - Interleaved 2 of 5
12
Tab
Space
ESC
*Default