Av Mode; Input Signal (For Analog Pc Input Mode Only) - Sharp LC-19SB15U, LC-19SB25U, LC-19SB25U-W Operation Manual

Useful adjustment settings

AV MODE

AV MODE gives you 7 viewing options to choose from
to best match the surrounding environment of the TV,
which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
Press AV MODE.
1
• Current AV MODE displays.
Press AV MODE again before the mode
2
displayed on the screen disappears.
• The mode changes as shown below.
TV INPUT1/2 mode
(Example)
AV Mode: STANDARD AV Mode: MOVIE
AV Mode: DYNAMIC
AV Mode: GAME
AV Mode: DYNAMIC (FIXED)
AV Mode: USER (TV)
INPUT3 mode
(Example)
AV Mode: STANDARD
AV Mode: MOVIE
AV Mode: DYNAMIC AV Mode: GAME
AV Mode: DYNAMIC (FIXED) AV Mode: PC
AV Mode: USER ( )
INPUT4 (PC) mode
(Example)
AV Mode: STANDARD AV Mode: PC
AV Mode: USER ( )
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1.)
40
This manual downloaded from http://www.manualowl.com
Selected item
STANDARD For a highly defi ned image in a normal
lighting
MOVIE For a movie
GAME Lowers image brightness for easier viewing
PC For PC (Available only with inputting RGB
signal.)
USER Allows the user to customize settings as
desired. You can set the mode for each
input source.
DYNAMIC Changes the image and sound settings to
(FIXED) the factory preset values. No adjustments
are allowed.
DYNAMIC For a clear-cut image emphasizing high
contrast, useful for sports viewing
Input Signal (for Analog PC input
mode only)
Some input signals may have to be registered manually
to display properly.
The pair of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it will display when the same signal
(resolution) is input again.
1024 g 768 1280 g 768
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU to display the MENU screen, and
1
then press c / d to select "Setup".
Press a / b to select "PC Setup", and then
2
press ENTER.
Press a / b to select "Input Signal", and then
3
press ENTER.
Press a / b to select the desired input signal
4
on the display.
Press MENU to exit.
5
Description
1360 g 768