Eco Pip (Picture In Picture); Source; Size; Position - Sharp 28LF-96EC Operation Manual

In order to quit the AV mode press the “
“P/CH+” / “-P/CH” button.

Eco PIP (Picture in Picture)

There is a Picture in Picture (PIP) module in your TV. The
presence of the PIP module is automatically detected after
switching the TV on. PIP function will not be available in
Teletext mode.
PIP window can be accessed by “
ton on the Remote Control.
• With the PIP function can be seen two different video sig-
nals simultaneously, a video signal in the main screen and
other video signal in secondary screen (PIP).
• With the PIP function can be listened the two audio sig-
nals, a signal in the loudspeakers and another signal in the
headphones.
• Also it is necessary to clarify if there is some limitation. For
example, that, the signal proceeding from the antenna of
the TV can be seen in one of the screens only.
Pressing “ /
displayed. To exit the PIP menu “
be pressed.

Source

By selecting SOURCE item you can select the PIP source
among EXT-1, EXT-2, EXT-3, S-VHS, S-EXT2 or FRONT
by pressing “ ” or “ ” button.
• In AV mode, PIP source can be EXT-1, EXT-2, EXT-3,
S-VHS, S-EXT2, FRONT or TV.
• In AV mode, if Source is selected as TV, PIP program can
be changed by “

Size

You can select the PIP size as SMALL or LARGE by press-
ing “ ” or “ ” button.
Downloaded from: http://www.usersmanualguide.com/
79
”, digit buttons or
/ ” (PIP On/Off) but-
” button for the second time PIP Menu is
79
” or “M” button has to
QDQÃH@IV
TPVS8@
@YU
TDa@ TH6GG
#
QPTDUDPI
XDQ@
/ ” or “ / ” buttons.

Position

You can select Position by pressing “ ” or “ ” button. Posi-
tion can be set to 1 (top left), 2 (top right), 3 (bottom right) or
4 (bottom left) by pressing “ ” or “ ” button.

Wipe

By pressing the “
you can exchange the TV screen picture and the PIP pic-
ture,
or
In PIP menu select WIPE by pressing “ ” or “ ” button. If
you press “ ” button, TV main picture and PIP picture are
exchanged.

PIP menu in AV mode

In AV menu, PIP menu is as follows:

Program

This option is seen in PIP menu, when TV is in AV mode. If
SOURCE item selected as TV, the program in PIP window
can be selected by “ ” or “ ” or digit buttons.
ENGLISH - 16 -
/ ” button on the Remote control,
QDQÃH@IV
QSPBS6H
TPVS8@ UW
TH6GG
TDa@
QPTDUDPI #
XDQ@