Kenwood KDC-U5049DAB Instruction Manual page 34

Wiring connection
Antenna Cord
Front output
Rear output/ Sub
Woofer output
switchable ("SWITCH
PREOUT" page 9)
DAB antenna input
(SMB) ("DAB ANT
POWER" page 9)
Wiring harness D
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
If no connections are made, do not let the wire come out from the tab.
Blue
(Antenna control wire)
Blue/White
(Power control wire)
Brown
(Mute control wire)
Light Blue/Yellow
(Steering remote control
wire )
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
34
English
FM/AM antenna
input (JASO)
R L
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
ANT. CONT
P.CONT
MUTE
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
USB connector
AUX input (Stereo)
Use the mini-plug (3.5 mm ø) cable which
is stereo type and does not have any
resistance.
Fuse (10A)
To Kenwood disc changer/
External optional accessory
(To connect these leads, refer to
the relevant instruction manuals.)
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna, or
to the power terminal for the booster amplifier of the
film-type or short pole type antenna.
When using the optional power amplifier, connect to
its power control terminal.
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
To connect the Kenwood navigation system, consult
your navigation manual.
To use the steering wheel remote control feature, you
need to an exclusive remote adapter (not supplied)
matches your car is required.
Car fuse box
ACC
Ignition key switch
Car fuse box
(Main fuse)
Battery
– +