USSC WONDERCOAL 2827 Owner's Manual
USSC WONDERCOAL 2827 Owner's Manual

USSC WONDERCOAL 2827 Owner's Manual

Automatic coal burning circulator heater
Hide thumbs Also See for WONDERCOAL 2827:

Advertisement

Quick Links

HOW TO ORDER REPAIR PARTS
This manual will help you to obtain efficient, dependable service
from the heater, and enable you to order repair parts correctly.
Keep this manual in a safe place for future reference.
When writing, always give the full model number which is on the
nameplate attached to the inside of the cabinet door of the
heater.
When ordering repair parts or options, always give the
following information as shown in this list:
1. The PART NUMBER
2. The PART DESCRIPTION
3. The MODEL NUMBER:
4. The SERIAL NUMBER:________________
Before installing your heater, fill in the serial number of your
heater in the space provided above.
United States Stove Company
227 Industrial Park Rd.
South Pittsburg, TN 37380
(423) 837-2100
2827
2827B
B2827
B2827B
Owners Manual
Models 2827, 2827B, B2827, B2827B
WONDERCOAL
AUTOMATIC COAL BURNING CIRCULATOR HEATER
*ASSEMBLY
*INSTALLATION
*OPERATION
*REPAIR PARTS
Tested to UL 1482
SAFETY NOTICE:
If this heater is not properly installed, a house fire may result.
For your safety, follow the installation directions.
Contact local building or fire officials about restrictions and
inspection requirements in your area.
CAUTION:
Read all instructions carefully before starting the installation
or operation of this heater.
Improper installation may void your warranty.
DO NOT USE THIS HEATER IN A MOBILE HOME OR TRAILER
United States Stove Company
227 Industrial Park Rd.
S
C
U
S
South Pittsburg, TN 37380
(423) 837-2100
www.USSTOVE.com
85862J

Advertisement

Table of Contents
loading

Summary of Contents for USSC WONDERCOAL 2827

  • Page 1 Owners Manual HOW TO ORDER REPAIR PARTS Models 2827, 2827B, B2827, B2827B This manual will help you to obtain efficient, dependable service WONDERCOAL from the heater, and enable you to order repair parts correctly. AUTOMATIC COAL BURNING CIRCULATOR HEATER Keep this manual in a safe place for future reference. When writing, always give the full model number which is on the nameplate attached to the inside of the cabinet door of the *ASSEMBLY...
  • Page 2: Tools And Material Needed

    CB36 BLOWER KIT An Optional Blower kit is available for the 2827 and B2827 Wondercoal TOOLS AND MATERIAL NEEDED coal burning circulator heaters. This option is standard for models 2827B and B2827B. If this kit is not available where you have purchased this Wondercoal heater, you can purchase a blower kit directly from the factory.
  • Page 3 INTERIOR REPAIR PARTS LIST - (SEE PAGE 15) RULES FOR SAFE INSTALLATION AND OPERATION Read these rules and the instructions carefully. AUTOMATIC COAL BURNING CIRCULATOR SAFETY NOTICE: If this heater is not properly installed, a house fire may result. For your Key No.
  • Page 4: Locating The Heater

    EXTERIOR REPAIR PARTS LIST LOCATING THE HEATER AS A LOCATION IS SELECTED, AUTOMATIC COAL BURNING CIRCULATOR HEATER KEEP THE FOLLOWING IN MIND: 1. The chimney connection should be as air NOTE: BEFORE FIRING tight as possible. The heater must have its own MODEL NUMBER B2827, B2827B HEATER chimney.
  • Page 5: Chimney Connection

    EXTERIOR REPAIR PARTS LIST CHIMNEY CONNECTION Two basic types of chimneys are approved for use with solid fuel: Factory-built and AUTOMATIC COAL BURNING CIRCULATOR HEATER masonry. Factory-built chimney must comply with UL103HT standard. Do not expect your stove or furnace to create draft. Draft is not a function of the MODEL NUMBER 2827, 2827B appliance.
  • Page 6 REPAIR PARTS - EXTERIOR VENTING INTO A FIREPLACE Many people may wish to convert an Many prefabricated fireplaces fall into existing fireplace to heater use. Usually, the "zero-clearance fireplace" category. safe connection of stovepipe to a ma- This is a factory metal fireplace with sonry chimney requires more effort than multilayered construction.
  • Page 7: Fireplace Installation

    INSTRUCTIONS FOR TWO-STEP LATCH OPERATION 1. Follow these instructions to operate you unit safely when operating the feed door. FIREPLACE INSTALLATION Install the stovepipe as far as possible into the thimble, but not past the inside 2. Turn handle clockwise to the 12 o'clock position, pull the door open until you of the flue lining.
  • Page 8: Service Hints

    Most masonry chimneys have a cleanout. If yours does, make sure it is gasketed or SERVICE HINTS otherwise sealed. A loose fitting door will contribute greatly to the draft problems. Do not expect a heater to draw. It is the 4.
  • Page 9 SUGGESTIONS FOR BURNING ANTHRACITE COAL RULES FOR CONNECTOR PIPE INSTALLATION 1. With coal it is important to maintain a clean chimney. The chimney connector and 1. The crimped end of the stovepipe fits 5. Seal each connector pipe joint with chimney should be inspected at least twice monthly during heating season.
  • Page 10 OPERATING INSTRUCTIONS 3. Shake Grates vigorously back and CAUTION: GASES THAT ARE CAUTION: NEVER USE THE MANU- forth to dump ashes into ash pan. Do FACTURED COAL BRICKS THAT DRIVEN FROM FRESH COAL MUST this at least once every 12 hours of FUEL BE BURNED OR THEY WILL ACCU- ARE MADE FROM COAL DUST AND...

This manual is also suitable for:

Wondercoal 2827bWondercoal b2827Wondercoal b2827b

Table of Contents