Air Circulation; Moving The Projector - Sanyo PLC-XL50 Owner's Manual

Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken.
– Do not put any flammable objects or spray can
near the projector. Hot air is exhausted from the air
vents.
– Keep the exhaust vent at least 3' (1 m) away from
any objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the projector is being used.
– Do not put anything on the projector. Objects put
on the cabinet will not only get damaged but also
may cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fan's running speed is changed according to the
temperature inside the projector.
6

Moving the Projector

When the projector is not in use for an extended period,
put it into a suitable case.
Handle the projector carefully; do not drop, bump,
subject it to strong forces, or put other things on the
cabinet.
– Do not drop or bump the projector, otherwise
damages or malfunctions may result.
– Do not hold the rear leg.
– When carrying the projector, use a suitable carrying
case.
– Do not transport the projector by courier or any
other transport service in an unsuitable transport
case. This may cause damage to the projector. For
information about transporting the projector by
courier or any other transport service, consult your
dealer.
– Do not put the projector in a case before it is cooled
enough.
Exhaust Vent
(Hot air exhaust)
Air Intake
Vent
CAUTION IN CARRyING OR
TRANSPORTING THE PROjECTOR