Running Olympus Sonority - Olympus DM-550 Detailed Instructions

Running Olympus Sonority

By connecting the recorder to your PC, you can automatically start the application.
Windows
Disabling automatic start
1 Right click on the [
taskbar on the lower right of the
screen, and select [Setting].
• The application which enables setting
will be displayed by dialog.
2 Click the [
Sonority].
• The check mark on [Olympus
Sonority] disappears. For automatic
start, select and click "Olympus
Sonority" to reinstate again.
5
Manual start
1 Start Windows.
2 Click the [Start] button, select
[All Programs], then [Olympus
Sonority].
• Information display area will appear.
• After start up, a [
displayed in task bar in the bottom
right of the screen.
8
] of the
] of the [Olympus
] icon will be
Macintosh
Disabling automatic start
1 From the menu bar, click [
[System Environment Setting] {
[ ].
• The setting dialog box will appear.
2 Turn the automatic start up in the
setting check box to [OFF].
Manual start
1 From Finder, double-click
[Application] { [Olympus
Sonority] { [Olympus Sonority].
• When starting up for the first time,the
serial number registration dialog box
will appear.
2 Enter the Serial Number.
• For the product serial number, refer
to the serial number on the separate
sheet.
• The information Display Area will
appear if the serial number is correct.
Notes
• You cannot run more than one "Olympus
Sonority" program or multiple copies of
the same program simultaneously.
• When other applications such as DSS
Player, etc. are opened, close these
applications first before starting up the
"Olympus Sonority".
] {