Olympus DM-550 Detailed Instructions page 35

Digital voice recorder
Hide thumbs Also See for DM-550:
Table of Contents

Advertisement

While the recorder is during
playback mode, press the 0
button twice.
• The recorder skips to the beginning of the
previous file.
Notes
• When you skip to the beginning of the file
during playback, the recorder will stop at
the position of the index mark and temp
mark. The index mark and temp mark
will be skipped when you perform the
operation in stop mode (☞ P. 38).
• When [Skip Space] set to other than
[File Skip], the recorder will skip forward/
reverse the specified time, then will start
playback (☞ P. 52).
Playback through earphone
An earphone can be connected to the EAR
jack of the recorder for listening.
To EAR
jack
• When the earphone is used, the recorder
speaker will be switched-off.
Notes
• To avoid irritation to the ear, insert the
earphone after turning down the volume
level.
• When you listen with the earphone during
playback, do not raise the volume too
much. It may cause hearing impairment
and decrease in hearing ability.
Settings relating to playback
[Segment
This function enables
repeat]
repeated playback of part of
(☞ P.40)
the file being played.
This changes the order of the
files in the selected folder. It
[Replace]
is useful for playing back files
(☞ P.56)
in a preferred order while in
normal playback mode etc.
If recorded audio is difficult
to understand because of
[Noise Cancel]
noisy surroundings, adjust
(☞ P.50)
the Noise Cancel setting
level.
Level adjustments of
[EUPHONY]
the [EUPHONY] setting can
(☞ P.50)
be set to four stages accord-
ing to preference.
The recorder has a Voice
Filter Function to cut low
[Voice Filter]
and high frequency tones
(☞ P.50)
during normal, fast, or slow
playback, and enable clear
audio playback.
You can select the playback
[Play Mode]
mode that fits your prefer-
(☞ P.50)
ence.
The playback speed can be
[Play Speed]
set to slow speed or fast
(☞ P.51)
speed playback.
[Skip Space]
The skip interval length can
(☞ P.52)
be set.
The alarm playback function
[Alarm]
can be set to play a selected
(☞ P.52)
file at a pre-set time.
Playback settings of your
[Play Scene]
choice can be saved to suit
(☞ P.52)
different sound qualities and
playback methods.
You can listen to the first few
[Intro Play]
seconds of a file by touching
(For DM-550)
the cursor to a file within a
(☞ P.53)
folder.
Playback
3
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dm450

Table of Contents