Buderus Logano G315 Installation And Service Instructions Manual page 23

▶ Place rear cover (Fig. 39, [1]) between the side panels so the cut-out
(Fig. 39, [2]) fits over the tie bar.
1
Fig. 39 Fitting the rear cover
Push the base rails (Fig. 40, [2]) onto the bottom folded edges of the
side panels and screw on at the side using one self-tapping screw in each
case (Fig. 40, [1 and 3]).
3
2
Fig. 40 Fitting the front base rail
▶ Screw the top rear boiler panel (Fig. 41, [2]) to the back of the cover
(Fig. 41, [1]) and the side panels.
Logano G315 – 6 720 817 939 (2017/02)
2
Fig. 41 Fitting the rear boiler panel
▶ Screw the bottom rear boiler panel (Fig. 42, [2]) with the cut-out for
the fill and drain connection down onto the side panels (Fig. 42, [1
720 42 21-33.1o
and 3]).
3
Fig. 42 Fitting the bottom rear boiler panel
1
6 720 817 939-02.1T
7
Boiler block assembly
1
2
6 720 817 939-03.1T
1
2
6 720 817 939-04.1T
23