Cleaning The Outside - Fujitsu ScanZen EK6 Consumable Replacement And Cleaning Instructions

Cleaning the Outside

The outside of the scanner, including the ADF paper chute (feeder) and stack, should be cleaned with a
piece of dry cloth, or a cloth moistened with F1 Cleaner or mild detergent, or a sheet of cleaning wipes.

To avoid deformation and discoloration, never use paint thinner or any other organic solvents.

Be careful not to let any moisture or water get inside the scanner during cleaning.

It may take a long time to dry if an excessive amount of F1 Cleaner or mild detergent is used.
Use it in small quantity. Wipe off the cleaner completely to leave no residue on the cleaned
parts.
You can use either:
A cleaning cloth (as provided) with the F1 Cleaner or a mild detergent
+
Or, the cleaning wipes (also provided)
CG00002-297901
©ScanZen
ATTENTION:
11