Advertisement
Contents
Connections
Front Display
Adjust the display brightness of this unit.
o Dimmer
Bright
(Default):
Dim:
Dark:
Off:
0 When the display brightness is set to "Off", the display turns off as in the
standby state.
0 You can also adjust the display by pressing DIMMER on the main unit.
Front panel
Display
Playback
Normal display brightness.
Reduced display brightness.
Very low display brightness.
Turns the display off.
Rear panel
Settings
Firmware
When new firmware is supplied, update this unit using the USB port.
Use a USB memory device to update the firmware.
o Update Start
Start the firmware update.
To update the firmware, connect the USB memory device to the USB
port on this unit.
98
Remote
Tips
Appendix
Index
Advertisement
